🛒 My Cart (0)

Successfully programmed a 2024 Opel Corsa F flip key with all keys lost using the Xhorse Key Tool MIDI programmer.

Step 1: Read PIN Code

Decode the door lock using a Lishi auto pick.
Go to IMMO Programming –> Peugeot –> Password Reading –> Type 3 CAN (Adding).

Select Read Password.
Turn off the ignition switch.

Xhorse Key Tool MIDI Program Opel Corsa F 2024 All Flip Keys Lost 01 Xhorse Key Tool MIDI Program Opel Corsa F 2024 All Flip Keys Lost 02 Xhorse Key Tool MIDI Program Opel Corsa F 2024 All Flip Keys Lost 03

 

 

Turn the ignition off and wait 5 seconds, then turn it back on. Repeat this process until the Xhorse Key Tool MIDI successfully reads the 4-digit password.

Xhorse Key Tool MIDI Program Opel Corsa F 2024 All Flip Keys Lost 04

NOTE: Opel and Peugeot share similar systems on this model, making PIN code reading straightforward through the Peugeot menu once you understand how the system works.

Step 2: Program All Keys Lost

The procedures for key adding and all keys lost are the same.

Go to IMMO Programming- Opel- Select Model- Corsa- Corsa F- Flip Keys- 2019 Onwards- All Keys Lost.

Xhorse Key Tool MIDI Program Opel Corsa F 2024 All Flip Keys Lost 05 Xhorse Key Tool MIDI Program Opel Corsa F 2024 All Flip Keys Lost 06 Xhorse Key Tool MIDI Program Opel Corsa F 2024 All Flip Keys Lost 07 Xhorse Key Tool MIDI Program Opel Corsa F 2024 All Flip Keys Lost 08

All existing keys will be erased once this function is completed.

Please enter the PIN code to continue.

 

Enter the number of keys to be programmed: 2

Xhorse Key Tool MIDI Program Opel Corsa F 2024 All Flip Keys Lost 09

Insert the first key to be programmed and turn on the ignition within 15 seconds.
The first key has been programmed successfully.
Switch off the ignition and remove the key.

Xhorse Key Tool MIDI Program Opel Corsa F 2024 All Flip Keys Lost 11

Xhorse Key Tool MIDI Program Opel Corsa F 2024 All Flip Keys Lost 12

Insert the second key and switch the ignition on within 15 seconds.
Key programming completed successfully.
Switch off the ignition and remove the key.
Next, synchronize the remote by following these steps:

Test both programmed keys to confirm they work properly and ensure successful key programming.

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *

✔ Added to cart! View Cart →