Xhorse VAG MQB48 NEC35XX Authorization for Add Key and All Keys Lost For VVDI Key Tool Plus/VVDI2+VVDI Prog

Description

Product Description

\n

\nXhorse VAG MQB48 NEC35XX Authorization for Add Key and All Keys Lost For VVDI Key Tool Plus/VVDI2+VVDI Prog
\n
\nVAG MQB NEC35XX License have been officially released:
\n1. To activate the feature, you need to own KET TOOL PLUS or VVDI2+VVDI PROG.
\n2. All key lost requires third-party cooperation to obtain certain data, and may incur extra charges.
\n3. Support read immo data for MQB48 type (with NEC35xx chip) which can’t read by OBD or all key lost. Support add key and all key lost (need synchronize data).
\n
\nNotes:
\n1) KEY TOOL PLUS/VVDI2+VVDI PROG (Leave your key tool plus or vvdi2+vvdi prog serial number under your order)
\n2) PART OF DATA FOR AKL MAY COST AN EXTRA FEE.
\n3) SUPPORT MQB48 ADD/AKL(SYNC DATA REQUIRED), SUPPORT READ NEC35XX SERIES CHIP DATA.
\n4) ONLY LICENSE TO ACTIVATE, NO NEED READ SHIPPING.
\nONCE ADD LICENSE OK, NOT SUPPORT CANCEL TO REFUND!!!
\n
\n
\nSupport List
\nFor VW: Golf 7 Magotan CC T-Roc Tayron Bora Sagitar Lamando Variant Passat Lavida TiguanL Teramont
\nFor Audi: A3 Q2 Q3L
\nFor Skoda: Octavia Kodiaq Superb Karoq
\n
\nCluster List:
\nMQB Cluster D70F3532 (A2C81589500)-A 
\nDash type: 560G920750
\n
\nMQB cluster D70F3529
\nDash type 5G1920730B
\n
\nMQB Cluster D70F3526 (A2C81589700)-C
\nDash type: 3G0920791B
\n
\nMQB Cluster D70F3526 (A2C81589700)-B
\nDash type: 8V0920861 
\n
\nMQB Cluster D70F3526 (A2C81589700)-A
\nDash type:6C0920740A 6C0920940
\n
\nMQB Cluster D70F3525 (A2C81589600)-B
\nDash type: 8V0920861 
\n
\nMQB Cluster D70F3525 (A2C81589600)-A
\nDash type:56G920730C
\n
\nMQB NEC35XX License Using Tips:
\n1. Add key: Use keytool plus , vvdi prog to read immo data from dashboard (need remove the dashboard from car), then program key to car with the immo data.
\n2. For AKL, program key will need immo data and sync data, it still need get sync data online and program key with both immo data and sync data.
\n3. There are two ways to read MQB immo data with vvdi prog/key tool plus,
\none is pin lift method the other is track cut method – might only be for that particular dashboard, probably not all will have track cut method.
\n4. You must enable function with VVDI Prog + VVDi2 , so VVDi Prog will get possibility to read dump ,
\nand VVDI2 can decode ONLY that file was is read over YOUR VVDI Prog serial number.
\n5. Click NEC35XX locked cluster part number list to check if the wiring diagram matches.
\n
\n
\nNotice before order the VAG MQB48 License:
\n1. If you have VVDI2, make sure it is full version. (Provide SN to us to confirm if you are not sure it is full version or not. )
\n2. Make sure your vvdi2/vvdi prog and key tool plus has registered with xhorse account. 
\nIf not sure if device is registered, provide S/N to us to check as well. 
\n
\nAfter confirm 1 and 2, provide vvdi2+vvdi prog/Key tool plus serial number to us after you pay. 
\nWe will activate license within 24 working hours. 
\n
\nVAG MQB48 Activate steps:
\n1.For vvdi2 and vvdi prog, follow this way to active the VAG MQB48 License:
\n1)Use the upgrade kit to identify vvdi2 or vvdi prog, click on the binding in the upper right corner, and it will come up with a QR code.  
\n2)Find the cartoon character interface on the mobile APP, click on account in the lower right corner, 
\nthere is a “combind device”, click “combind device”, and scan the QR code for binding.
\n2.For vvdi key tool plus, register and login in tablet,and enter the “Update”. 
\n
\n 
\n

\n